Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the flywheel and transmission of the Ford Transit

Model: Ford Transit MK 8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Drivetrain

See other generations:
Video tutorial

In this guide, we will see the main instructions that will allow us to disassemble and replace the steering wheel and remove the transmission of the Ford Transit. First of all, we raise the vehicle and start disassembling the exhaust manifold, unscrewing the metal clamps screws and removing the metal panel afterwards; then we drain the engine oil and disconnect the transmission from the gearbox, as shown in the video.

At this point, we open the clutch housing to access the flywheel, replacing it in this case with the new one; we remove the transmission if necessary!


Posted on 1 January 2025 by ScegliAuto


Related tutorials

How to Replace the Propshaft Supports on a Ford Transit
How to Replace the Propshaft Supports on a Ford Transit
Ford Transit (2006-2014 / MK 7) In this video, we will see how to change the propshaft supports on a camperised Ford Transit: start by spraying WD-40 on all the bolts, then go under…
How to Remove the Passenger Side Wing Mirror on a Ford Transit
How to Remove the Passenger Side Wing Mirror on a Ford Transit
Ford Transit (2006-2014 / MK 7) In this guide, remove the passenger side wing mirror on a Ford Transit. Unscrew the securing screws of the mirror using a screwdriver (external side)…
How to Remove the Fuse Box from a Ford Transit?
How to Remove the Fuse Box from a Ford Transit?
Ford Transit (1986-1994 / MK 4) Today, you will learn how to remove the fuse box from a Ford Transit MK4 model. The fuse box you will be removing is located inside the cabin, under …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos