Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the tailgate lock of a Ford C-Max MK2.

Model: Ford C Max MK 2 - Years 2010-2019
Part: Door lock

In this video we will see what to do if the tailgate of the Ford C-Max does not open. It could be due to one of the fuses. This model of C-Max has three fuse boxes. The first one is located in the engine compartment, in the right corner when facing the car from the front; but that's not the one we need. Let's go find the one in the cabin, which is instead behind the glove compartment, behind a cover that has been removed here. Right here we need to check fuse number 65, in the top right corner, next to the fuse you can see the number. But there's another one we need to check, and it's located in the box in the trunk, above the left wheel arch. We need to check fuse number 1 of 5 amps and number 25 of 25 amps.

Posted on 15 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the trunk lock of the Ford C-Max
How to replace the trunk lock of the Ford C-Max
Ford C Max (2010-2019 / MK 2) Today we will see the necessary information on how to disassemble and replace the latch or lock of the rear hatch of the Ford C-Max. First, we open t…
Replacement of the front hood lock of the Ford CMax MK2
Replacement of the front hood lock of the Ford CMax MK2
Ford C Max (2010-2019 / MK 2) Let's see how to proceed to replace the key lock of the front hood of the Ford C-Max. With the hood open, remove the grille above the radiator by uns…
How to Open the Stuck Bonnet of the Ford C-Max Mk1?
How to Open the Stuck Bonnet of the Ford C-Max Mk1?
Ford C Max (2003-2010 / MK 1) This guide shows how to open the bonnet of the Ford C-Max Mk1. The operation will involve breaking the front grille of the vehicle. Using a screwdriv…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos