|
Do it yourself
| |||
| ||||
How to Clear the Low Battery Warning on a Ford Galaxy or S-Max
Model: Ford Galaxy
MK 3
- Years 2015-2023
Both the Ford Galaxy and Ford S-Max have a Battery Monitoring System (BMS) that monitors the battery's status. After replacing the battery, the system must be reset to learn the parameters of the new battery; otherwise, it will continue to calculate the charge based on the old (depleted) battery's data, triggering false alarms and poor charging management. It is crucial that the sequence is performed in the correct timing and order. Therefore, with the new battery and the driver's door open: turn on the sidelights, turn on the ignition and wait for 5 seconds, then press the front fog light button 5 times at regular intervals of 1 second between presses. After the 5th press, the battery light should start flashing (indicating that you have entered learning mode). Immediately press the hazard light button 4 times, in the same manner. After the 4th press, the light should turn off completely. You will hear the horn sound once and/or the steering wheel will lock electrically and then unlock. This indicates that the reset was successful. Turn off the ignition, turn off the lights, and wait for 30 seconds to allow the control unit to save the data. Start the engine: the battery light should be off.
Posted on 26 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Ford Galaxy
(2015-2023 /
MK 3)
To replace the small button battery located in the key of your Ford Galaxy Mk3 on your own, you must first carefully read the following guide and the…
Ford Galaxy
(2015-2023 /
MK 3)
We see all the necessary information in order to disassemble and replace the battery of the remote control key of the Ford Galaxy, as well as the Mon…
Ford Galaxy
(2006-2015 /
MK 2)
The Service light that is shown on the instrument panel of the Ford Galaxy can be reset by inserting the ignition key into the corresponding slot, so…
Other guides you may be interested in
|
How to Bleed the Clutch on a Renault Clio?
To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.289
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |