Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Light on the Ford F-250

Model: Ford F-250 P473 - Years 2011-2016
Part: Service warning light

In this video, we will go over the main instructions to reset the engine oil light on the Ford F-250 in simple and quick steps. First, get inside the vehicle and make sure all the doors are closed. Then, start the engine and scroll through the options on the dashboard display using the arrows on the steering wheel until you reach the vehicle settings and the engine oil life, as shown in the video. At this point, press the "ok" button to reset the service and the mileage before the next oil change!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford F-250
How to Reset the Service Light on a Ford F-250
Ford F-250 (2011-2016 / P473) Today, I will show you how to reset the oil change light on a Ford F-250 by yourself. Turn on the ignition and press the menu button on the steering …
How to Replace the Turn Signal Bulb on the Ford F-250
How to Replace the Turn Signal Bulb on the Ford F-250
Ford F-250 (2011-2016 / P473) In today's tutorial video, you will see the procedure for removing and replacing the turn signal bulb in the side mirror of the Ford F-250. First, re…
How to Reset the Tire Pressure Light on a Ford F-250?
How to Reset the Tire Pressure Light on a Ford F-250?
Ford F-250 (2017-2022 / P558) To reset the tire pressure light, turn on the ignition to check that the light comes on; the dashboard will also indicate which tire has insufficient…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos