Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement and Checks

Model: Ford Transit MK 7 - Years 2006-2014
Part: Engine oil

The video shows a series of checks to be performed periodically, which are certainly advisable during maintenance such as an oil change: to perform this, simply unscrew the drain plug of the oil sump (located on the side of the sump) and then replace the filter located just behind the alternator (apply oil to the gasket of the new filter before screwing it in).
Once the engine is filled with new oil to the correct level, check the condition of the battery (there is a transparent eye on the battery that should be green inside), the levels of coolant and power steering fluid, and finally dust off the engine air filter.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement on Ford Transit 2.2 MK7
Ford Transit (2006-2014 / MK 7) In today's tutorial video, you will learn how to replace the engine oil and oil filter on the Ford Transit MK7 with a 2.2 litre engine. First, gather…
How to Change the Engine Oil on a Ford Transit
How to Change the Engine Oil on a Ford Transit
Ford Transit (2014-2024 / MK 8) To change the engine oil on a Ford Transit, loosen the oil drain plug located at the bottom of the vehicle. Once the plug is loosened, collect all th…
Engine Oil and Oil Filter Replacement on the Ford Transit MK6
Engine Oil and Oil Filter Replacement on the Ford Transit MK6
Ford Transit (2000-2006 / MK 6) Follow these step-by-step instructions to carry out the routine maintenance oil change on the sixth-generation Ford Transit. First, lift the vehicle …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos