Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. G80
    4. : How to restore oil life on Genesis G80

Genesis G80 - Video tutorial

Model: Genesis G80 MK 2, DH - Years 2016-2020
Part: -board computer
Operation: How to restore oil life on Genesis G80

In this video tutorial we can see how to restore the life of the oil on Genesis G 80. After performing the do-it-yourself service, get on board the car, put the handbrake, insert the ignition key and turn on the instrument panel without starting the engine; use the button on the book-shaped steering wheel on the right next to the CRUISE button, continue until you find the "USER SETTINGS MENU"; once we are on this screen, we will use the button below to scroll down, keep scrolling down, until we select the maintenance interval; now press on the button, to access another screen and on this screen scroll down and select RESET and press the button to confirm. Now start the engine to check that the reset was successful.


Posted on 28 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos