Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : How to reset the oil change light on hyundai santafe

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: -board computer
Operation: How to reset the oil change light on hyundai santafe

To reset the service light on Hyundai Santa Fe, follow this procedure: when the service light comes on, the first thing to do will be to change the engine oil and the oil filter. After the do-it-yourself service, get on board the car and turn on the instrument panel; press the open book-shaped button on the steering wheel several times to scroll through the menu, until the wrench with the word service appears; now hold down the arrow key to reset. Switch the ignition off and then on again to check that the reset has been carried out correctly.


Posted on 21 December 2022 by ScegliAuto



How to change the key battery in a hyundai santafe
Hyundai Santa Fe (2019-2024 / MK 4, TM) Through this very short and simple video tutorial, we can see all the steps necessary to replace the battery (CR2032) in the key of a Hyundai Santa F
Resetting the service light of the Hyundai Santa Fe.
Hyundai Santa Fe (2012-2018 / MK 3) Through these instructions, we will see how to reset the maintenance light for the regular oil change of the Hyundai Santa Fe. First, we get inside t
How to change the battery on hyundai santafe
Hyundai Santa Fe (2012-2018 / MK 3) If we want to try our hand at replacing the battery on this car model in do-it-yourself mode, we will find the methods to follow in this intervention

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos