Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jaguar
    3. :
  3. X-Type
    4. : Cabin air filter replacement

Jaguar X-Type - Video tutorial

Model: Jaguar X-Type MK 1 - Years 2001-2009
Part: Cabin air filter
Operation: Cabin air filter replacement

The cabin air filter of this car model is located in the engine compartment, on the passenger side, immediately under the windshield: to replace it, it is necessary to remove the plastic grille applied just below the windshield by releasing the relative fixing clips; once the grille has been raised, the filter can be extracted by slightly deforming it; make sure that there are no residues of dirt inside the filter seat and insert the new one (we recommend the activated carbon one) orienting it according to the direction of the air flow indicated by the arrows printed on the filter itself.


Posted on 9 September 2023 by ScegliAuto



How to replace a cabin air filter on Jaguar X Type
Jaguar X-Type (2001-2009 / MK 1) How to replace the pollen filter on a Jaguar X Type? Let's see how to disassemble the filter located in the dedicated housing: with a screwdriver we
Cabin air filter replacement
Jaguar X-Type (2001-2009 / MK 1) The passenger compartment air filter is located in the engine compartment, immediately below the windscreen: to be able to replace it, the plastic co
How to replace the air filter on a Jaguar X-Type.
Jaguar X-Type (2001-2009 / MK 1) In this video tutorial we see how it is possible to replace the air filter on a Jaguar X-Type, following some simple steps: the first thing to do is

Other guides that may interest you

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos