Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Cabin Air Filter

Model: Jaguar X-Type MK 1 - Years 2001-2009
Part: Cabin air filter

The cabin air filter is located in the engine compartment, just below the windscreen. To replace it, you need to remove the plastic trim grille located just under the windscreen, also disassembling the wiper arms. Start by applying a piece of masking tape on the windscreen to mark the angle of the wipers, lift the cover that conceals the nut securing the arms, and after unscrewing the nut, you may need a puller to extract it from the splines of the control arm. At this point, remove the pressure clips securing the plastic grille to access the filter housing. Extract the old filter, clean the housing, and insert the new one, then reverse the process for reassembly.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on Jaguar X Type
How to Replace the Cabin Air Filter on Jaguar X Type
Jaguar X-Type (2001-2009 / MK 1) How do you replace the pollen filter on a Jaguar X Type? Follow these steps to remove the filter from its housing: use a screwdriver to remove the pl…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Jaguar X-Type (2001-2009 / MK 1) The cabin air filter for this car model is located in the engine compartment, on the passenger side, just below the windscreen: to replace it, remove…
How to Replace the Air Filter on Jaguar X-Type
How to Replace the Air Filter on Jaguar X-Type
Jaguar X-Type (2001-2009 / MK 1) In this video tutorial, learn how to replace the air filter on a Jaguar X-Type by following these simple steps: First, purchase a new air filter. Nex…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos