|
Do it yourself
| |||
| ||||
How do you activate the cruise control in the Jeep Compass?
Model: Jeep Compass
552, MK 2
- Years 2016-2025
The cruise control is an electronic system, also called tempomat, that allows you to maintain the set speed without having to continuously press the accelerator. To activate it, you need to press the appropriate button on the steering wheel when the cruising speed is approximately 32km/h and press the "Set" button to set the speed. The "set+" and "set-" buttons allow you to adjust it according to your needs. When it is no longer needed, the cruise control can be deactivated via the "cancel" button or by pressing the brake or accelerator pedal.
Posted on 13 May 2023 by ScegliAuto
Video tutorial
Related tutorials
Jeep Compass
(2006-2016 /
MK 49, MK 1)
How to deactivate or activate the Cruise control of a Jeep Compass? We follow the video. We enter the passenger compartment, turn on the instrument p…
Jeep Compass
(2016-2025 /
552, MK 2)
The following video tutorial shows us how to enable and disable the Cruise Control of the Jeep Compass model 2, produced from 2016 to 2025. To activa…
Jeep Compass
(2016-2025 /
552, MK 2)
For specific needs, it is possible to deactivate the front passenger airbag protection in a car, for example to install a child seat or to perform ma…
Other guides you may be interested in
|
Frequently Asked QuestionsInstallation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.067
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
