Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil on a Maruti Eeco

Model: Maruti Eeco MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Engine oil

Video tutorial

If you want to proceed with the engine oil and filter replacement on this vehicle, you can find guidance on how to do it by referring to this video and the description below. The engine on this vehicle is located under the passenger seat, so to access the oil fill cap, you need to flip the seat and open the cap. Then, lift the vehicle and locate the drain plug under the oil pan. Get a container to collect the used oil and unscrew the plug.

Wait a few minutes for all the oil to drain out, then re-screw the plug. Near the oil drain plug is the filter, which needs to be unscrewed with the appropriate wrench and replaced with a new one after replacing and lubricating the gasket.

Then screw on the new filter and return to the cabin to fill the system with new oil.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in the Maruti Eeco Van?
How to Replace the Cabin Filter in the Maruti Eeco Van?
Maruti Eeco (2010-2024 / MK 1) In this tutorial, see how to replace the cabin filter in the Maruti Eeco van. First, sit in the passenger seat, then open the glove compartment, gras…
How to Replace the Serpentine Belt on a Maruti Eeco?
How to Replace the Serpentine Belt on a Maruti Eeco?
Maruti Eeco (2010-2024 / MK 1) To replace the serpentine belt on a Maruti Eeco, lift the vehicle and loosen the bolts that secure the right front wheel, completely removing it. Onc…
How to Replace the Suspension on a Maruti Eeco
How to Replace the Suspension on a Maruti Eeco
Maruti Eeco (2010-2024 / MK 1) To replace the suspension on a Maruti Eeco, lift the vehicle with a jack or lift so that the wheels are not in contact with the ground. This will all…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos