Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on the Maruti Sx4

Model: Maruti Sx4 MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

Video tutorial

If you need to change the engine oil and filter on this vehicle, you can check the video and read the instructions provided in this description. After lifting the hood and removing the oil filler cap, raise the vehicle and locate the drain plug on the side of the oil pan. Remove this plug after placing a container on the floor to collect the used oil. Next, remove the oil filter using the appropriate wrench, then take the new filter and screw it on after replacing the gasket.

Finally, reinstall the oil drain plug and return to the top of the engine to fill the system with new lubricant.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement for Maruti Sx4
Engine Oil and Oil Filter Replacement for Maruti Sx4
Maruti Sx4 (2007-2014 / MK 1) Follow these steps to perform routine maintenance by replacing the engine oil and oil filter on the Maruti Sx4. First, lift the vehicle and start dra…
Replace the Cabin Air Filter of the Maruti Sx4
Replace the Cabin Air Filter of the Maruti Sx4
Maruti Sx4 (2007-2014 / MK 1) In this guide, see how to replace the cabin air filter of the Maruti Sx4. First, get inside the vehicle on the passenger side and open the glove comp…
Replacing the Fuel Filter on a Maruti Sx4
Replacing the Fuel Filter on a Maruti Sx4
Maruti Sx4 (2007-2014 / MK 1) In today's tutorial video, you will learn how to remove and replace the fuel filter on a Maruti Sx4, following the instructions below. First, open th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos