Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the throttle body of a Mazda 6?

Model: Mazda 6 MK 1, GG - Years 2002-2008
Part: Throttle body

To replace the throttle body of the Mazda 6, you need to open the hood to access the components inside the engine compartment. You will then need to unscrew the screws that hold the air filter box so that it can be completely removed, giving access to the throttle body located at the back. The part will then need to be removed by unscrewing its fixing screws and disconnecting its connectors. This will allow a new throttle body to be inserted, connected to the air filter box, and fixed in place.

Posted on 13 April 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace valve from Mazda car Mazda 6
How to replace valve from Mazda car Mazda 6
Mazda 6 (2002-2008 / MK 1, GG) Let's see together how to disassemble and replace the PVC valves of a Mazda. We lift the car on a column bridge and place it at the preferred height.…
How to remove the bonnet of a Mazda 6
How to remove the bonnet of a Mazda 6
Mazda 6 (2002-2008 / MK 1, GG) Do you want to remove and replace the front hood and you don't know how to do it? Let's see in this video how to open and remove the bonnet of our Ma…
How to remove the rear bumper on the Mazda 6?
How to remove the rear bumper on the Mazda 6?
Mazda 6 (2008-2012 / GH, MK 2) In this tutorial, we can see how to remove the rear bumper on the Mazda 6, a very simple and fast operation. First of all, we open the trunk door, th…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos