Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag in the Mercedes C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Airbag

See other generations:
Video tutorial

In this tutorial, you will see how to replace the steering wheel airbag in the Mercedes C-Class, a very simple and quick operation. Before proceeding, open the hood and disconnect the negative terminal of the battery to avoid accidental airbag deployment.

Start by going inside the cabin, then locate the two screws on the back side of the steering wheel and remove them using a T30 Torx wrench. Next, grasp the airbag, detach it from the steering wheel, and disconnect the power connector.

At this point, you can install the replacement by following the reverse procedure.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

How to Remove the Airbag from a Mercedes C-Class?
How to Remove the Airbag from a Mercedes C-Class?
Mercedes Classe C (2014-2021 / W205) ..s to remove the airbag from our Mercedes C-Class. For safety reasons, before starting, disconnect the battery. Begin by sitting in the driver’s sea.. …
How to Remove the Steering Wheel Airbag from a Mercedes C-Class?
How to Remove the Steering Wheel Airbag from a Mercedes C-Class?
Mercedes Classe C (2014-2021 / W205) .. To remove the airbag from the Mercedes C-Class, loosen the screws that secure the airbag to the center of the steering wheel: these screws are.. …
How to Remove the Steering Wheel Airbag from a Mercedes C-Class?
How to Remove the Steering Wheel Airbag from a Mercedes C-Class?
Mercedes Classe C (2000-2007 / W203) .. the steering wheel airbag from a Mercedes C-Class, loosen the screws that secure the airbag to its housing: these screws are located at the back.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos