Do it yourself
| ||||
|
Mercedes Classe C - Video tutorial
Model: Mercedes Classe C
W204
- Years 2007-2013 If it happens that the steering wheel is blocked and the engine cannot be started, it means that a fault has been generated in the electric steering lock block which is located in the rear part of the steering column, but facing the windscreen and not the pedals. , for which it will be necessary to disassemble the column itself to be able to access it; start by unhooking the airbag and then extracting the steering wheel (mark the straight wheels reference position with a marker) and then the light switch control block; remove the frame around the instrument panel to access the steering column fixing pins: to complete the extraction it will be necessary to remove the fixing pin of the spider to the steering gear pinion.
Posted on 4 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.047
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |