Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Changing the oil on the automatic transmission of the Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Gear oil
Operation: Changing the oil on the automatic transmission of the Mercedes C-Class

If we want to replace the transmission oil of this car, we can follow the instructions given in this video and in the description below. The first thing to do is to lift the car onto the lift, remove the soundproofing panel under the engine and open the automatic transmission oil drain, let the oil flow out and collect and dispose of it appropriately. Screw the drain plug back on using the appropriate gasket, disassemble the oil pan and remove the transmission filter to replace it with the new one. Apply the new gasket to the sump using the screw kit to reassemble the sump. Then use the appropriate pump to fill the transmission circuit with approximately 4 liters of oil.


Posted on 25 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2000-2007 - How much oil does the automatic gearbox of the Mercedes C-Class contain? Read Answer
    • Classe C 2007-2013 - How many km do you replace the oil in the automatic gearbox of the Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos