Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the dashboard of the Nissan Micra

Model: Nissan Micra K13 - Years 2010-2017
Part: Dashboard

In this video tutorial, we will see the main instructions on how to disassemble the entire dashboard of the Nissan Micra. Firstly, we get into the car and start by removing the airbag and its steering wheel by disconnecting the electrical connector and unscrewing the central nut. Then, we unscrew the screws of the instrument panel to remove it, as shown in the video. At this point, we unscrew the screws of the glove box and then disassemble the entire central tunnel, removing the gear shift knob. We then remove the instrumentation (the air conditioning controls and the radio) to disassemble the entire dashboard!

Posted on 20 May 2023 by ScegliAuto

This video is currently unavailable

Related tutorials

How to remove the dashboard of the Nissan Micra
Nissan Micra (2002-2010 / K12) Let's see in this guide, the main instructions that will allow us to disassemble and replace the dashboard of the Nissan Micra. First of all, let's g…
How to remove the odometer of the Micra
How to remove the odometer of the Micra
Nissan Micra (2002-2010 / K12) Remove the Nissan Micra instrument cluster? Let's see how to do it right away. We remove the plastic frame of the instrument panel cover (without bre…
How do you reset the Service light on the Nissan Micra?
Nissan Micra (2002-2010 / K12) To reset the Service light on the instrument panel of the Nissan Micra, you will need to hold down the button located on the right side of the instru…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos