Do it yourself
Frequently asked questions about cars and motorcycles

Engine Oil and Oil Filter Replacement in an Opel Astra J

Model: Vauxhall Astra Astra J - Years 2009-2016
Part: Engine oil

Open the oil filler cap to allow the oil to drain more quickly. Lift the front of the car to access the oil tank bolt and use safety jack stands. Remove the plastic cover if present. Place a container under the oil sump to collect the used oil. Use a Torx socket wrench size 45 to loosen the oil filter bolt, then finish by hand (wear protective gloves). Use a socket wrench with an extension and a 32mm socket to loosen the filter counterclockwise, then finish unscrewing by hand. Use a flathead screwdriver to remove the gasket under the flange edge. Clean the flange with a cleaner and a cloth. Remove the two gaskets located on the filter support bar. Place the new gaskets. Take the new filter and insert it into the bar, then fit everything into the flange; lubricate the gaskets installed on the flange. Screw the filter in by hand, then tighten with the 32mm socket wrench. Screw in the drain and oil bolts. Lower the vehicle and top up the engine oil.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Astra (2004-2010 / Astra H) In this short video, we will see how to perform routine maintenance by replacing the engine oil and oil filter on an Opel Astra H with a 1.7 CDTI eng…
Vauxhall Astra (2004-2010 / Astra H) Replacing the oil filter and engine oil on the Opel Astra model H is a simple and quick operation to perform independently. To start, open the hood a…
Vauxhall Astra (2009-2016 / Astra J) To replace the oil filter on the Opel Astra J, open the bonnet to access the components in the engine bay. The oil filter is located on the right sid…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos