Do it yourself
Frequently asked questions about cars and motorcycles

How to perform an emergency start in the Peugeot 308?

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Checks and maintenance

In this tutorial we can see how to perform an emergency start in the Peugeot 308, an extremely simple and quick operation, to be carried out for example in case of complete battery discharge. To do this, we will need the appropriate starter, available online in various models. First of all, we open the engine hood, then we insert the key but leave it in the initial position. We then connect the red clamp to the positive pole of the battery, connect the black clamp to any area of the frame, activate the starter and start the engine. Finally, make sure to disconnect the negative terminal first.

Posted on 13 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 308 (2021-2026 / P5, MK 3) With the function mentioned above active, an involuntary distraction of the driver, resulting in a swerve, causing the vehicle to go beyond its lane,…
Peugeot 308 (2007-2014 / T7, MK 1) How to perform maintenance on a Peugeot 308? This guide explains how to replace the battery: Open the car door and pull up the engine compartment rel…
Peugeot 308 (2007-2014 / T7, MK 1) If you want to disassemble one of the two front seats in your first edition Peugeot 308 by yourself, you just need to follow the steps described in t…

Other guides you may be interested in

    Frequently Asked Questions

    • 308 2013-2021 - Why is the Peugeot 308 not connecting to Bluetooth? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos