Do it yourself
Frequently asked questions about cars and motorcycles

How to change the oil in the Peugeot 308 MK1

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Engine oil

In this video, we will see how to change the oil in the Peugeot 308 MK1: on this car, the oil filter is changed from the top, by removing the air filter and the intake group: disconnect the vacuum sensor, remove the air tubes from the filter group, then remove the filter itself using a 10 mm socket; unscrew the air filter cover with a 27 mm socket and remove the old air filter. Now prepare for draining, placing the container for used oil under the oil pan, and using an 8 mm hex key, find the drain plug and unscrew it: let the oil drain completely, then clean the area around the plug well. Install a new plug and a new gasket and tighten it to 30 Nm. Replace the oil filter, remove the gasket and when installing the new filter, lubricate the new gasket with clean oil. Tighten the oil filter cap to 25 Nm. Now reassemble the air filter group and the tubes in the reverse order of disassembly, making sure all connections are tight to avoid air leaks. Add 4.25 liters of new oil, according to the manufacturer's specifications; start the engine, let it run for a few minutes until the oil light goes out, then check the oil level dipstick and top up if necessary.

Posted on 30 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 308 (2007-2014 / T7, MK 1) On the Peugeot 308, the job is set up like a classic oil service: secure the vehicle and first drain the used oil, working from underneath with a pro…
Peugeot 308 (2007-2014 / T7, MK 1) Need to change the battery on a Peugeot 308? Remove the battery if it is damaged. Open the car door and pull up the lever to open the engine compartm…
Peugeot 308 (2007-2014 / T7, MK 1) To change the engine oil and filter on a Peugeot 308, park the car on a flat surface and let the engine cool down to make the oil more fluid, then sa…

Other guides you may be interested in

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos