Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the fluid levels on the Peugeot 2008 MK1 diesel

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

Let's see how to check the level of liquids on a Peugeot 2008 MK1 diesel: we start with the engine oil by pulling out the dipstick, wiping it with a cloth, putting it back in place, and then checking it. The level should be between "min" and "max". If it is low, we add small amounts of oil recommended by the manufacturer, checking each time.

The level should NEVER be above the maximum level.

The brake fluid is located in a small transparent reservoir, and theoretically it does not get consumed. If it has decreased, it means that the brake pads are wearing out. We add fluid, but plan to change the pads.

The coolant is located in the transparent expansion tank, and here too it should be close to "max". If it is lower, we add the fluid, of the same color as the one in the tank. For the windshield washer fluid, we fill it up to the brim with the specific fluid, never with tap water that could clog the ducts and damage the windshield.


Posted on 14 November 2025 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on Peugeot 2008, 208
Replacing the Diesel Filter on Peugeot 2008, 208
Peugeot 2008 (2013-2019 / MK 1) In this video tutorial, you will learn how to remove and replace the diesel filter on Peugeot 2008 and 208 models. First, lift the car and locate the…
How to Change the Language of the Menu on the Peugeot 2008
How to Change the Language of the Menu on the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Below are the instructions that will allow you to change the language of the main menu on the Peugeot 2008. First, get in the vehicle and turn on the…
How to reset the service in the Peugeot 2008?
How to reset the service in the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) Resetting the service in the Peugeot 2008, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must hav…

Other guides you may be interested in

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - Why does the Peugeot 2008 touch screen display no longer work? Read answer
    • Peugeot 2008 2013-2019 - How much does it cost to replace the urea tank on a Peugeot 2008? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos