Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 807
  6. : How to change the engine oil and oil filter on Peugeot 807 2.0 16V

Peugeot 807 - Video tutorial

Model: Peugeot 807 MK 1 - Years 2002-2014
Part: Engine oil
Operation: How to change the engine oil and oil filter on Peugeot 807 2.0 16V

In this guide we will see the step-by-step instructions to be able to carry out the routine maintenance service of the oil change on the Peugeot 807 with 2.0 16-valve petrol engine. First of all we lift the car and start unscrewing the oil vent bolt that we find on the sump, letting it drain in a container for about ten minutes; then we go to disassemble the oil filter, which we find near the alternator, using a socket wrench. After replacing the filter cartridge we can finally pour in the new engine oil with the right characteristics!


Posted on 14 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos