Do it yourself
| ||||
|
Peugeot 207 - Video tutorial
Model: Peugeot 207
MK 1
- Years 2006-2015 The positions of the fuse boxes of the car are as follows: the first is located in the passenger compartment on the left side under the dashboard on the passenger side and the second is located in the engine compartment near the battery; the diagram of the fuses is shown below. passenger compartment fuses: F1 Rear wiper. F2 - Not used. F3 Airbag and pretensioners calculator. F4 Clutch pedal switch, diagnostic socket, electrochromic internal mirror, air conditioning, steering wheel angle sensor, particulate filter pump (Diesel). F5 Power windows, rear power windows, sunroof. F6 Front power windows, power fold mirrors. F7 Front and rear ceiling lights, map reading lights, sun visor lighting, glove box lighting, clock. F8 Audio equipment, audio/telephone, CD changer, multifunction screen, clock, steering wheel controls, flat tire detection, trailer fuse box. F9 Front prize 12 V. F10 Alarm siren, alarm control unit, directional projectors. F11 Diagnostic socket, low current ignition switch. F12 Rain/light sensor, amplifier, trailer fuse box, driving school module. F13 Engine fuse box, ABS relay, “2 Tronic†selector lever, dual function brake switch. F14 Instrument panel, seat belt warning bar, headlight adjustment, air conditioning, hands-free kit, rear parking control unit, airbag. F15 Block and deadlocks. F17 Defrosting of rear window and exterior rear view mirrors. SH - PARK bypass. G39 Hi-Fi amplifier. G40 Heated driver and passenger seats (except RHD).
Posted on 24 November 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.115
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |