Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box Diagram for the Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

This vehicle has two fuse boxes; the first is located in the cabin, just below the steering wheel on the left side of the dashboard, near the driver's door, and to access it, you need to open a small plastic cover. The other fuse box is located under the bonnet near the battery.

The fuse box in the engine compartment contains the fuses for the left and right dipped beams, left and right main beams, windscreen wipers, steering angle sensor, headlamp washer pump, horn, and engine control unit.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

Diagram and positioning of the external fuses of the Peugeot Partner Tepee.
Diagram and positioning of the external fuses of the Peugeot Partner Tepee.
Peugeot Partner Tepee (2008-2018 / B9) These short and simple steps will show us the layout and positioning of the external fuse box of the Peugeot Partner Tepee. First, we open the vehicl…
Fuse box and fuse positioning of the Peugeot Partner Tepee
Fuse box and fuse positioning of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) This guide will show us the information related to the positioning and the fuse box layout of the Peugeot Partner Tepee. First, we open the hood of t…
Fuse Box Layout and Diagram for the Peugeot Partner
Fuse Box Layout and Diagram for the Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) This video shows the layout and diagram of the fuse boxes for the Peugeot Partner in its B9 version from 2008 to 2011. The cabin fuse box is located …

Other guides you may be interested in

How to Replace the Rear Light Bulb on a Citroen C5

To replace the rear light bulb on a 2015 Citroën C5, open the boot of the vehicle and remove the side carpet to access the inside of the light unit. Disconnect the light connector and remove the screw. Take out the light unit and proceed to replace the stop light bulb. Open the light housing and replace the bulb. Follow the same procedure for the right rear light bulb. Once the replacement is complete, refit the light unit, reconnect the connector, and close the side carpet. If the bulb does not work correctly, check the fuse related to the light before replacing it again.

Watch the video!


by ScegliAuto

More videos