Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on the 2019 Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

If the position light bulb on your Peugeot Partner burns out, you need to replace it as soon as possible. To change it, open the bonnet and secure it with the prop rod. Position yourself at the affected headlight, and at the rear, inside the engine compartment, you will notice a cap that can be removed by turning it. For easier access to the position bulb, it is preferable to also remove the dipped beam bulb.

Pull out the bulb holder and remove the burnt-out bulb, replacing it with a new one. Reassemble everything in reverse order of disassembly. Once the cap is closed, check the correct functioning of the headlight.


Updated on 18 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Peugeot Partner?
How to Replace the Rear Light Bulb on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the rear light bulb on a Peugeot Partner, open the tailgate. Unscrew the screws that secure the light unit within its housing and disconne…
How to Replace the Headlight Bulb on a Peugeot Partner?
How to Replace the Headlight Bulb on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the headlight bulb on a Peugeot Partner, open the bonnet to access the circular cap at the rear of the headlamp. Once the cap is removed, …
How to replace the headlight bulb of the Peugeot Partner.
How to replace the headlight bulb of the Peugeot Partner.
Peugeot Partner Tepee (2008-2018 / B9) Today we will explain how to replace the headlight bulb of the Peugeot Partner. To carry out the replacement, it is necessary to remove the water pum…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos