Do it yourself
Frequently asked questions about cars and motorcycles

Checks and Maintenance of Car Filters

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

This video is currently unavailable

The components of your car are subject to wear. To keep your car performing well over time, extend its life, drive safely, and save on potential repair costs, it is important to carry out regular maintenance and checks.

There are various filters within a car, the main ones being: the oil filter, pollen filter, air filter, and fuel filter. It is advisable to replace them every 15,000-20,000 miles or in conjunction with the car service.

It is essential to periodically check that the air filter is clean, as it purifies the air entering the engine and is crucial for the engine's health. The oil filter is usually replaced when you change the oil, as replacing the filter involves completely draining the oil contained in the engine.

The pollen filter, on the other hand, purifies the air that is drawn from outside into the cabin.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Peugeot 206 (1998-2012 / MK 1) It is important to always carry out good maintenance on your car to keep costs as low as possible. Certainly, a vehicle with many miles requires more…
Peugeot 206 (1998-2012 / MK 1) If the SERVICE warning light is illuminated on the instrument cluster, it means it is time for maintenance; after replacing the engine oil and the co…
Peugeot 206 (1998-2012 / MK 1) There is an indirect method to check the efficiency of the injectors by monitoring the amount of diesel recovered: if the injectors are functioning a…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos