Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Expert
    4. : Where are the fuses located in the Peugeot Expert?

Peugeot Expert - Video tutorial

Model: Peugeot Expert Mark1, MK 1 - Years 1995-2007
Part: Fuse box
Operation: Where are the fuses located in the Peugeot Expert?

On the Peugeot Expert, the fuses are contained within the appropriate fuse boxes that are present on the vehicle: in this type of vehicle it is possible to identify two fuse boxes. The first one is located in the lower left part of the dashboard compared to the steering column: it contains the fuses that are responsible for the operation of the car radio, the horn, the headlight washers, etc. The second fuse box is instead located on the right side of the engine compartment: it contains the fuses that regulate the operation of the alternator, the low beam headlights, the fuel pump, etc.


Posted on 20 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Expert 2008-2016 - Where are the fuses located in the Peugeot Expert? Read Answer
    • Expert 2008-2016 - Where is the Peugeot Expert window lift fuse located? Read Answer
    • Expert 2008-2016 - What is the Peugeot Expert air conditioning fuse? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos