Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the ESP System in the Smart ForTwo?

Model: Smart Smart 451 - Years 2007-2015
Part: Checks and maintenance

In this tutorial, you will see how to disable the ESP system in the Smart ForTwo 451. First, note that this procedure will also disable the ABS, as the control unit for both systems is the same. Start by inserting the key but leave it in the initial position, then press and hold the two buttons on either side of the dashboard while simultaneously turning on the instrument cluster. You may need another person if you have difficulty reaching both buttons with one hand. Release the pressure as soon as the large yellow triangle starts flashing and then start the engine.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the ESP on a Smart Fortwo
How to Disable the ESP on a Smart Fortwo
Smart (2007-2015 / 451) This guide briefly outlines the steps to disable the ESP system or traction control on a Smart Fortwo; it is recommended never to disable the ESP sys…
How to Disable the ESP System in a Smart ForTwo?
How to Disable the ESP System in a Smart ForTwo?
Smart (1998-2007 / 450) This video demonstrates how to disable the ESP system in a Smart ForTwo 450, applicable to all versions of this model. Since there is no dedicated sw…
How to Disable the Start&Stop System on the Smart Fortwo
How to Disable the Start&Stop System on the Smart Fortwo
Smart (2014-2022 / 453) In this guide, we will see the main instructions that will allow you to disable the Start&Stop system on the Smart Fortwo. First, get inside the vehi…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 1998-2007 - How do you unlock the Smart Fortwo immobilizer? Read answer
    • Smart 1998-2007 - Where is the horn of the Smart 450 located? Read answer
    • Smart 1998-2007 - Where is the jack on a Smart ForTwo? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos