Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate and deactivate the traction control of the Toyota Highlander

Model: Toyota Highlander Xu40 - Years 2008-2013
Part: Checks and maintenance

Today we will discover the instructions that will allow us to activate and deactivate the traction control of the Toyota Highlander, in simple and quick steps. First of all, we get into the car and start the dashboard; the traction control is always active at the first engine start and it will be possible to deactivate it from the appropriate button that we find on the side of the dashboard (next to the steering wheel), as shown in the video. At this point, we will see the warning light on the dashboard, indicating that the traction control is temporarily deactivated, pressing the button again to activate it.

Posted on 29 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Disable and Enable Traction Control on the Toyota Highlander
How to Disable and Enable Traction Control on the Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) Here are the instructions to disable and enable the traction control on the Toyota Highlander. Remember that traction control should always be active…
How to Disable the Traction Control (TRC) on a Toyota Highlander
How to Disable the Traction Control (TRC) on a Toyota Highlander
Toyota Highlander (2008-2013 / Xu40) These simple steps will show you how to disable the traction control on a Toyota Highlander; it is advised not to disable traction control on the roa…
How to deactivate the traction control of the Toyota Highlander
How to deactivate the traction control of the Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) In a few simple steps, we will see how to deactivate the traction control system of the Toyota Highlander; however, it is recommended never to disabl…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos