Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Clutch Pump

Model: (Various brands) Various
Part: Clutch

If you need to install a new clutch pump on the vehicle's transmission assembly, you will need a sealant, the replacement part, and a gasket. For the installation, you can refer to the video tutorial and the instructions provided below. The first step is to spread sealant on the mounting surface, then position the gasket on the pump and engage the pump onto the gearbox bell housing. Proceed to tighten the bolts securing the pump to the gearbox. Always remember to bleed the pump before the first engine start.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Check if Your Car's Clutch is Worn
How to Check if Your Car's Clutch is Worn
(Various brands) Various In this video, see how to check if your manual car's clutch is worn. There are two very simple methods: the first is while driving at around 2,500 RP…
How to Recognise the Symptoms of a Worn Clutch
How to Recognise the Symptoms of a Worn Clutch
(Various brands) Various A clutch can be operated in three ways: first, the pedal is directly connected to the cable; second, there is a hydraulic pump that presses a bearing…
How to tell if your car's clutch is still reliable
How to tell if your car's clutch is still reliable
(Various brands) Various How to assess the wear of your car's clutch? If the clutch "grabs" when starting, it means the clutch is worn and no longer engages properly with the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos