Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery replacement on a Volkswagen Touareg

Model: Volkswagen Touareg MK 1, 7L - Years 2002-2010
Part: Battery

How to replace the battery on a Volkswagen Touareg? This guide explains how to remove the battery. Open the car door and lift the driver's seat; the battery is located underneath (in other cars, it is commonly found in the engine compartment). Remove the mat, and start unscrewing the seat's securing bolts with a socket wrench; unscrew the battery terminal bolts. Remove the old battery using the plastic handle and install a new one, tightening the power terminals. Close the battery compartment and lower the driver's seat.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on a Volkswagen Touareg
How to Replace the Key Battery on a Volkswagen Touareg
Volkswagen Touareg (2017-2024 / ) Start by inserting the tip of a thin but sturdy tool into the slot between the cover and the body of the key fob for your Volkswagen Touareg, then le…
How to Replace the Battery in a Volkswagen Touareg?
How to Replace the Battery in a Volkswagen Touareg?
Volkswagen Touareg (2010-2018 / MK 2, 7P) To replace the battery in a Volkswagen Touareg, loosen the screws securing the front and rear lower seat, disconnect the connectors, and remove the s…
How to Replace the Key Battery of the Volkswagen Touareg
How to Replace the Key Battery of the Volkswagen Touareg
Volkswagen Touareg (2002-2010 / MK 1, 7L) Replacing the battery inside the key of your Volkswagen Touareg Mk1 (2002-2010) takes just a few minutes and, with the following instructions, you wi…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos