Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Clutch Pedal Pump on Golf 5

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Pump

Is the clutch pedal pump on your Golf 5 not working anymore? Let's see how to remove it. Lift the bonnet and secure it, then access the clutch pedal pump. Start by removing the securing pins of the clutch pump, then take out the piece inside the cabin. Once the piece is removed from its seat, proceed to disconnect it (unplug the circulation pipes). Pull the clutch cable into the car. Install the new piece in the engine bay, tighten the screws properly, and test the correct operation of the clutch pump. Adjust the tension with the oil refill.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Clutch Pedal Pump from the Volkswagen Golf
How to Remove the Clutch Pedal Pump from the Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) This guide provides the main instructions on how to remove and replace the master cylinder or clutch pedal pump of the Volkswagen Golf. First, open t…
Removing the Clutch Master Cylinder on Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Is the clutch pedal pump on your Golf 4 not functioning anymore? Let's see how to remove it from the engine bay. Lift the bonnet and secure it, then …
Replacement of the clutch pedal sensor of the Volkswagen Golf
Replacement of the clutch pedal sensor of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The instructions in this guide will show us the process of disassembling and replacing the clutch pedal switch of the Volkswagen Golf. First, we get …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos