Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Clutch Cylinder from Volkswagen

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Pump

See other generations:
Video tutorial

In this video tutorial, you will see the main instructions for removing the clutch pedal pump from a seventh-generation Volkswagen Golf. First, open the front door and remove, if present, the knee airbag by unscrewing the three screws found under the steering wheel.

Next, remove the screw at the bottom to take off the bar at the top, allowing you to subsequently remove the clutch pedal to access the cylinder; once the pedal is removed, unscrew the cylinder's screws and replace it with the new one. Follow the video until the end!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Removing the Lock Cylinder from the Volkswagen Golf
Removing the Lock Cylinder from the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide, follow the necessary instructions to remove and replace the lock cylinder of the front door of the Volkswagen Golf. First, open the fr…
Removing the Clutch Pedal Pump on Golf 5
Removing the Clutch Pedal Pump on Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Is the clutch pedal pump on your Golf 5 not working anymore? Let's see how to remove it. Lift the bonnet and secure it, then access the clutch pedal …
Removing the Clutch Master Cylinder on Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Is the clutch pedal pump on your Golf 4 not functioning anymore? Let's see how to remove it from the engine bay. Lift the bonnet and secure it, then …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos