Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlight with Daylight

Model: Volkswagen Bora MK 6 - Years 1998-2005
Part: Headlight

Open the front bonnet and detach the trim by disconnecting the release tab of the bonnet. Remove the front bumper and wheel arch liners; at this point, you can access the fixing pins of the headlights and then remove them by disconnecting the respective connector. Also, remove the plastic cover located just behind the headlight. Then, fit the new headlight by first connecting the plug and seating it in its housing. Tighten the respective fixing pins and reassemble the bumper and then the trim. The new LED daylight headlights will give the vehicle a more modern and appealing look.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling the Front Headlight for Replacement
Dismantling the Front Headlight for Replacement
Volkswagen Bora (1998-2005 / MK 6) Open the bonnet and use a screwdriver to lever in the upper hole of the front grille to detach it, then remove the other clips. Unscrew the seven scr…
How to Adjust the Headlights of the Volkswagen Bora
Volkswagen Bora (1998-2005 / MK 6) In this brief guide, you will see the steps to adjust the height of the front headlights of the Volkswagen Bora, as well as the Jetta and Golf. First…
How to replace the headlight bulb of the Volkswagen Bora.
How to replace the headlight bulb of the Volkswagen Bora.
Volkswagen Bora (2005-2010 / MK 7) Briefly, we will see the instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the Volkswagen Bora. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos