Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to remove the airbag of a Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Airbags
Operation: How to remove the airbag of a Volkswagen Polo

Before starting, we will have to sit in the driver's seat of our Volkswagen Polo. So let's start by going to disengage and remove the top cover of the steering column column. After that, we'll have to turn the steering wheel ninety degrees to the left. By doing so, we will have reached the rear screws that secure the airbag to the steering wheel, which we will have to unscrew and remove. Once we have removed the rear screws, we will be able to slightly move the airbag away from its housing, and we will have reached the internal pin of the airbag, which we will have to go to disconnect. When we have completed this step, we will be able to permanently remove the airbag, and we will have successfully completed the disassembly.


Posted on 22 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - What kind of error can the airbag of the Volkswagen Polo give? Read Answer
    • Polo 2009-2017 - When does the airbag light turn on in the Volkswagen Polo? Read Answer
    • Polo 2001-2009 - Where is the Volkswagen Polo 9N airbag control unit located? Read Answer
    • Polo 2017-2025 - What to do if the airbag light comes on in the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - What does the "Airbag" light on a Volkswagen Polo mean? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos