Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Crankshaft Oil Seal on Volkswagen Passat B7

Model: Volkswagen Passat B7 - Years: 2010, 2011, 2012, 2013, 2014

See other generations:
Video tutorial

In this video tutorial, you will see step-by-step instructions to remove and replace the crankshaft oil seal on the Volkswagen Passat B7, following the instructions below. First, open the bonnet of your car and remove the upper plastic cover; then, remove the fuel filter located on the left, along with the expansion tank.

Next, remove the engine mount and lift the vehicle; remove the right front wheel and the wheel arch liner. Remove the auxiliary belt and unscrew the bolts of the crankshaft pulley; now replace the oil seal, following the video until the end!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Crankshaft Position Sensor on a Volkswagen Passat
Instructions for Removing the Crankshaft Position Sensor on a Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) In this video tutorial, we will see the instructions on how to remove and replace the crankshaft position sensor on a second-generation Volkswagen Pa…
Replacing the Front Driveshaft Boot on the Volkswagen Passat
Replacing the Front Driveshaft Boot on the Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) This guide will outline the main steps to remove and replace the front driveshaft boot on the Volkswagen Passat. First, lift the vehicle and start by…
Inspection and Replacement of a Driveshaft Joint
Inspection and Replacement of a Driveshaft Joint
Volkswagen Passat (1996-2005 / 3BG, B5) This video explains how to replace the joint and the corresponding boot of a Volkswagen Passat driveshaft. In the initial images, a new joint is comp…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos