Do it yourself
Frequently asked questions about cars and motorcycles

How to Solve the Radiator Blockage Problem on a Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Heater core

In this video, learn how to solve the radiator blockage problem on a Volkswagen Golf. The heating radiator is located beneath the steering column, near the pedals, and you will see particles from the radiator fluid that create a blockage; the first fault you will notice is a malfunction of the heating, which can also damage the water pump. Proceed to completely disassemble the front of the car. Perform a radiator flush using the original Volkswagen Audi fluids for optimal cooling. Then, replace the heating radiator. Check the condition of the water pump; if it is faulty, it will also need replacing, and finally, replace the thermostat.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today we will see the instructions that allow us to solve any problems with the immobilizer of the Volkswagen Golf. The immobilizer is an electrical …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this video we can see how to remedy the problem of the trunk of the Volkswagen VII that has filled with water; this is due to a break in a part of…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The symptom on a VAG group vehicle is heating that does not work or works poorly. The cause is the narrow channels of the cabin radiator, which becom…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos