Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Volkswagen Golf 7?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

In today's video, you will see how to reset the service interval on the Volkswagen Golf 7 and, consequently, how to turn off the spanner light. First, enter the vehicle and take a seat in the driver's seat.

Once seated, press and hold the button in the centre of the instrument cluster and then, simultaneously, turn the key to position 1 (or press the start button once if equipped with keyless entry). After a few seconds, a message will appear on the onboard computer requesting confirmation to reset the service; confirm and proceed.

Operation complete.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Volkswagen Golf 8?
How to Reset the Service Light on the Volkswagen Golf 8?
Volkswagen Golf (2019-2026 / MK 8, Golf 8, Golf Viii) To reset the Service light on the Volkswagen Golf, turn on the instrument cluster using the appropriate button to navigate within the menu. Use the d…
How to Reset the Service Light on a Volkswagen Golf?
How to Reset the Service Light on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The procedure we are about to see allows us to reset the service light on a Volkswagen Golf MK4, which is the fourth version of this model produced a…
How to Reset the Service Light on Volkswagen Golf 5?
How to Reset the Service Light on Volkswagen Golf 5?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) From the instrument panel of the Volkswagen Golf 5, you can eliminate the service light by holding down the button located on the right side of the i…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos