Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag from a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Airbag

See other generations:
Video tutorial

To remove the steering wheel airbag from a Volkswagen Polo, start by opening the bonnet to disconnect the negative terminal of the battery in the engine bay. Once disconnected, pry off the plastic covers surrounding the steering column directly behind the steering wheel.

This will allow you to turn the steering wheel first to the right and then to the left, loosening the screws located at the back.

Now the airbag will be free and can be removed from its housing by disconnecting the connectors inside.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Steering Wheel Airbag on a Volkswagen Polo
How to Replace the Steering Wheel Airbag on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this brief and simple guide, you will learn how to remove and replace the steering wheel airbag on a Volkswagen Polo, following the instructions b…
Removing the Steering Wheel from a Volkswagen Polo
Removing the Steering Wheel from a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Learn how to remove the airbag from the steering wheel of a Volkswagen Polo. Enter the cabin of the Polo and locate where to place your hands. Start …
How to Replace the Steering Wheel Airbag on a Volkswagen Polo?
How to Replace the Steering Wheel Airbag on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the steering wheel airbag on a Volkswagen Polo, use a tool to disengage the pins that secure the airbag to its housing. These clips are lo…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos