Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Seatbelt Chime on a Volkswagen Golf 5?

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Checks and maintenance

See other generations:
Video tutorial

To disable the seatbelt chime on a Volkswagen Golf 5, lift the carpet immediately under the front seat. Under this carpet, you will find two connectors: disconnect the black one for a moment, and perform the same operation for the front seat.

While the connector is disconnected, insert the seatbelt, and then reconnect the connector. This way, when you turn on the instrument cluster and unbuckle the seatbelt, you will notice that the chime does not sound.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Disable the Seatbelt Chime on the Volkswagen Golf
How to Disable the Seatbelt Chime on the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To disable the seatbelt chime on the Volkswagen Golf, connect a diagnostic tool to the vehicle's OBD port, located on the dashboard just below the st…
Where is the parking sensor buzzer located in the Volkswagen Golf?
Where is the parking sensor buzzer located in the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video, you can see where the parking sensor buzzer is located in the Volkswagen Golf and how to proceed if you need to replace it. As shown, …
How to Disconnect the Airbag from the Seat of the Volkswagen Golf 5
How to Disconnect the Airbag from the Seat of the Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To disconnect the airbag from the driver's or passenger's seat in a Volkswagen Golf model 5, you need to slide the seat back. You will immediately no…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos