Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace the low beam headlight bulb of the 2019 Volkswagen Polo AW1.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 6, MK VI, AW1, MK 6, Polo VI - Years 2017-2024
Part: Headlight bulb
Operation: How to replace the low beam headlight bulb of the 2019 Volkswagen Polo AW1.

With the help of this video tutorial, we will explain how to replace the low beam headlight bulb. First, let's open the hood of the engine compartment and unscrew the Torx screws that secure the headlight with a screwdriver. Now we can remove it from the housing by pulling it out, being careful not to break the wire connectors. Disconnect the connectors and remove the old bulb, then insert the new one. Now we reassemble the headlight, first connecting the connectors and then inserting the headlight into the housing. All that's left is to go inside the car to make sure the bulb is working.


Posted on 9 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the parking light bulb in the Volkswagen Polo 9n? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos