Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Volvo V50

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Diesel fuel filter

How to replace the diesel filter on a Volvo V50? Follow these steps: open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket spanner, undo the securing bolts of the metal plate as shown in the video and remove it. Remove the securing bolts of the diesel filter housing and disconnect the various pipes. Extract the diesel filter housing and position a new one. Finally, reassemble everything in reverse order.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on a Volvo V50
How to Replace the Fuel Filter on a Volvo V50
Volvo V50 (2004-2012 / MK 1) How to replace the engine fuel filter on a Volvo V50? Follow this guide: open the car door and pull up the lever to open the engine compartment locat…
Fuel Filter Replacement for Volvo V50
Fuel Filter Replacement for Volvo V50
Volvo V50 (2004-2012 / MK 1) In this tutorial, you will learn how to remove and replace the fuel filter in a Volvo V50. First, open the car's bonnet and remove the plastic protec…
Where is the Diesel Filter Located on a Volvo V50?
Where is the Diesel Filter Located on a Volvo V50?
Volvo V50 (2004-2012 / MK 1) In this video, you will see where the diesel filter is located on the Volvo V50 and how to proceed if you need to replace it, a very simple and quick…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos