Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Tail light bulb

In this tutorial, we can see how to replace the rear light bulbs in the BMW 3 Series, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the trunk door, remove the plastic cover along the inner edge of the headlight in question and unscrew the two screws just released using a 10mm socket wrench. Then grab the headlight, separate it from the body, disconnect the connector, and open the internal base. At this point, all that remains is to replace the faulty bulb and reassemble everything following the reverse procedure.

Posted on 3 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulbs in the BMW 3 Series?
How to replace the rear light bulbs in the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In this tutorial we can see how to replace the rear light bulbs in the BMW 3 Series, an extremely simple and quick operation. First of all, make sure…
How to know the fuse diagram of a BMW 3 Series
How to know the fuse diagram of a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…
How to replace the battery of the BMW 3 Series remote control?
How to replace the battery of the BMW 3 Series remote control?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial we can see how to replace the battery of the BMW 3 Series remote control, an extremely simple and quick operation. To do this, we wi…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos