Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the brake wear indicator light on the BMW 1 Series?

Model: BMW Serie 1 MK 3, F40 - Years 2019-2026
Part: Warning light – error code

It will be possible to perform the brake wear indicator reset operation on the BMW Series 1 by turning on the instrument panel, so that it is possible to navigate through the menu options on the onboard computer: to move within the menu, you will need to use the button located at the end of the lever on the left side of the steering wheel. Once the icon indicating the remaining kilometers until the brake pads replacement has been identified, you will need to press and hold the button for a few seconds to turn off the indicator light. To verify that the reset has been successful, you can turn off and turn on the instrument panel again.

Posted on 10 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a BMW 1 Series
How to Reset the "Service" Light on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Before you can start, ensure that the service has been carried out, then sit in the driver's seat of your BMW 1 Series. Begin by pressing the appropr…
How to reset the tyre pressure warning light on the BMW 1 Series F21?
How to reset the tyre pressure warning light on the BMW 1 Series F21?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) To reset the tyre pressure warning light on the BMW 1 Series, you need to turn on the instrument cluster to access the menu on the central display. H…
How to Open the Bonnet of a BMW 1 Series
How to Open the Bonnet of a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Before you start, sit in the driver's seat of your BMW 1 Series. Begin by pulling the bonnet release lever located at the bottom right of the driver'…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 1 2011-2019 - What does the BMW 1 Series airbag warning light mean? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos