Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear lever bushings on the Bmw Serie 3 E46

Model: BMW Serie 3 E46 - Years 1998-2006

In today's video we will see how to disassemble and replace the gear lever bushings of the Bmw Serie 3 E46, following these simple steps. First of all, we get on board the car and start by removing the gear knob and gaiter; then we unscrew the screws that we find at the base of the plastic cover, disconnecting the various electrical connectors that we find underneath. At this point let's remove the rubber to access the bushing and the gear lever bearing; we just have to remove the lever and replace the bush and the bearing with the new ones, lubricating everything.

Posted on 10 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to change the gear lever of a BMW 3 Series
How to change the gear lever of a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Thanks to this very short video tutorial today, you will be able to see the entire procedure necessary to change the gear shift knob of a BMW 3 Serie…
How to replace the gear knob on a BMW 3 Series
How to replace the gear knob on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Before we can begin, we will have to go and sit on the driver's seat of our BMW 3 Series. This operation must only be carried out with the engine off…
How to reset the service light on the BMW 3 Series E46
How to reset the service light on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) After servicing or changing the oil on your BMW 3 Series e46, the relevant maintenance warning lamp must also be reset manually. Below we will find o…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 1998-2006 - Where is the BMW E46 central locking fuse located? Read answer
    • Serie 3 2005-2013 - How many seals are found in the oil filter of a BMW 3 Series? Read answer
    • Serie 3 2005-2013 - How much was the new BMW 320 touring future outfitting cost? Read answer

How to Remove the Window Regulator Motor from a Peugeot 106

How do we remove the right door panel of a Peugeot 106? Let's see together in this video how to proceed. Use a lever to remove the plastic cover of the door handle, then, with a screwdriver, undo the securing screws on the plastic panel. Once all the screws are removed, detach the plastic clips that secure the door. Remove the window crank. With your hands, take off the door panel, disconnect any power connectors and release cable. Remove the window regulator motor inside the door by peeling off the adhesive protection.

Watch the video!


by ScegliAuto

More videos