Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Automatic Transmission of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Warning light – error code

Next, let's go through the instructions to reset and adapt the automatic transmission of the BMW 3 Series. First, get inside the vehicle and turn on the instrument cluster; what you will do is press and hold the accelerator pedal for thirty seconds to one minute, thus resetting the automatic transmission control unit, as shown in the video. At this point, turn off the instrument cluster and start the engine, then check the proper functioning of the vehicle's automatic transmission!

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Selector Seal on a BMW 3 Series
Replacing the Selector Seal on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today's guide will show you the main steps to remove and replace the selector seal on the transmission of a BMW 3 Series. First, lift the vehicle and…
Replacing the Center Bearing, Also Known as Flex Disc
Replacing the Center Bearing, Also Known as Flex Disc
BMW Serie 3 (1998-2006 / E46) If the center support bearing of your car's driveshaft is worn, also known as the Flex Disc, you may experience transmission issues or noises during …
Instructions for Disassembling the Drive Shaft
Instructions for Disassembling the Drive Shaft
BMW Serie 3 (1998-2006 / E46) To disassemble the drive shaft, lift the vehicle on a lift and first remove the exhaust pipe. Once the muffler is removed, take off the heat shield t…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos