Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light in the Chevrolet Captiva?

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

After covering a certain number of kilometers, or after a certain amount of time has passed, it is essential, in order to safeguard the health of the engine, to carry out a service, which involves replacing the engine oil, oil filter, air filter, and other components.

The work does not end there, we must then reset the service light, and if needed, we can use the following video as a guide: Turn on the instrument panel and press the accelerator pedal three times in a row, then hold it down for a few seconds to enable the reset as mentioned earlier.

Once this is done, the job is complete.


Posted on 15 January 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Chevrolet Captiva
How to Reset the Service Light on a Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) To reset the Service light on a Chevrolet Captiva, enter the cabin and press the accelerator pedal while the instrument cluster is off. While holding…
How to Reset the Service Light on the Chevrolet Captiva?
How to Reset the Service Light on the Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) To reset the Service light on the Chevrolet Captiva, sit inside the cabin and press the accelerator pedal while the instrument cluster is off. While …
How to Reset the Service Light on a Chevrolet Captiva
How to Reset the Service Light on a Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) To reset the Service light on a Chevrolet Captiva, turn on the instrument cluster by rotating the ignition key in the ignition barrel: once it is on,…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos