Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the front headlight of the Fiat Barchetta?

Model: Fiat Barchetta MK 1 - Years 1994-2005
Part: Headlight

To be able to remove the front headlight of the Fiat Barchetta you must first remove the front bumper so that you can loosen the screws that secure the supports of the lower part of the headlight. Once these screws have been loosened, you will need to open the hood to gain access to the engine compartment and loosen the screws that are inside. In this way the headlight can be removed from its housing and disconnected from its connector. Once the old headlight has been removed, it can be replaced with a new spare part which must be properly fixed and connected.

Posted on 21 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to remove the headlight of the Fiat Barchetta 1.8
How to remove the headlight of the Fiat Barchetta 1.8
Fiat Barchetta (1994-2005 / MK 1) In this video tutorial we will see how to remove and replace the headlight of the Fiat Barchetta 1.8i, following the instructions below. First we ope…
How to remove and refit the headrest on the Fiat Barchetta
How to remove and refit the headrest on the Fiat Barchetta
Fiat Barchetta (1994-2005 / MK 1) In this short video we will see the steps that will allow us to disassemble and reassemble the front headrest on the Fiat Barchetta, following the in…
How to disassemble the antenna in the Fiat Barchetta?
How to disassemble the antenna in the Fiat Barchetta?
Fiat Barchetta (1994-2005 / MK 1) In this tutorial, we can see how to disassemble the antenna in the Fiat Barchetta, a very simple and fast operation. First of all, make sure that the…

Other guides you may be interested in

How to Remove the Spark Plugs from a Volkswagen Up

How to remove and replace the spark plugs on a Volkswagen Up? Follow these steps for proper removal. Pull the lever to open the engine compartment and lift the front bonnet, securing it in place. Remove the plastic soundproofing panel on the cylinder head, then disconnect the power connectors using a screwdriver after unscrewing them with a socket wrench. Pull off the coils by hand and unscrew the spark plugs with the socket wrench, finally pulling them out of the cylinder head. Take the new spark plugs and guide them into the engine head using the extension of the socket wrench. Finally, tighten the spark plugs securely and reconnect the respective power connectors. To finish: reassemble the soundproofing panel and close the engine bonnet. - Socket wrench with sockets - Flat or screwdriver bits - Battery-powered screwdriver - Protective gloves.

Watch the video!


by ScegliAuto

More videos