Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Fiat 500 1.2 Petrol

Model: Fiat 500 - Years 2007-2021
Part: Clutch

Today you will see step-by-step instructions to remove and replace the clutch on a Fiat 500 1.2 petrol. First, lift the vehicle, even if just the front side. Start by removing the front wheels by unscrewing the bolts; then drain the engine oil. Next, extract the left front driveshaft by disconnecting the arm's pin; then unscrew all the bolts of the gearbox using a socket wrench with an extension. Now lift the engine from below and remove the engine mount; take off the gearbox and replace the clutch, following the video until the end!

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Pedal on the Fiat 500
How to Replace the Clutch Pedal on the Fiat 500
Fiat 500 (2007-2024 / 312) In this brief guide, you will discover the instructions to disassemble and replace the clutch pedal on the Fiat 500. First, get in the vehicle and re…
How to Replace the Clutch Pedal Switch on a Fiat 500?
How to Replace the Clutch Pedal Switch on a Fiat 500?
Fiat 500 (2007-2021 / 312) To replace the clutch switch on a Fiat 500, access the rear of the clutch pedal. This switch lifts upwards when the clutch pedal is pressed, allowing…
How to Remove and Replace the Fuel Pump on a Fiat 500
How to Remove and Replace the Fuel Pump on a Fiat 500
Fiat 500 (1957-1975 / Epoca) In this video, see how to remove and replace the fuel pump on a Fiat 500 (old model). Use a socket spanner to separate the fuel pump from its housing…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos