Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery on a Ford C Max

Model: Ford C Max MK 1 - Years 2003-2010
Part: Battery

Replace the damaged battery on a Ford C Max. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet, disengaging the locking lever with your fingers. Secure it in place. On the right, you will find the battery; remove the securing bolts from the battery terminals. Take out the battery from the engine compartment and replace it with a new one (same voltage). Close the engine bonnet after maintenance. Test the new battery installed in the Ford engine compartment.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery on the Ford C-Max 2
Replacing the Battery on the Ford C-Max 2
Ford C Max (2010-2019 / MK 2) In this guide, discover how to remove and replace the battery on the second series Ford C-Max in simple and quick steps. First, locate the battery in…
How to Replace the Battery on a Ford C-Max
How to Replace the Battery on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Learn how to replace the battery on a Ford C-Max: open the boot of the car (in the C-Max, the battery is located at the rear) and uncover the fabric/…
Where is the Battery Located in the Ford C-MAX?
Where is the Battery Located in the Ford C-MAX?
Ford C Max (2010-2019 / MK 2) In the latest models of the Ford C-MAX, the 12V battery is no longer located in the traditional spot in the engine bay; instead, it is found in the r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos